best way to clean a jetted tub
Kristina Davis

Looking for a best way to clean a jetted tub?

Have you ever found yourself relaxing in your bathtub after a long tiring day and suddenly found unsightly debris and gunks floating in the water?

If you have, then read on!  

We understand how vital your jetted tub is for you but let’s all be realistic:

Even if there are advertised health and medical benefits of its massaging water-therapy, a jetted tub will only be rehabilitative and soothing as it is sanitary and clean.

READ NEXT:  How to Clean a Disgusting Bathtub in Easy Steps

Therefore, you have to get both your hands dirty now and then in order to experience and enjoy the calming benefits of a whirlpool bath.

Cleaning a jetted tub does not take hours of exhausting and punishing labor.

But this is not a fast and simple process either but look at the bright side; the pleasure of getting such a relaxing relief from a stressful world would make it entirely worth the cleaning.

If you aim to know the best way to sanitize and clean your jetted tub, then read the guide below!

Best Way to Clean a Jetted Tub- Things You’ll Need

Before we start, it’s crucial that you know the materials you’ll need and the steps we will perform for you to be ready.

Check out  the following:

READ NEXT:  How to Protect Bathroom Walls From Urine? - Working Methods

Materials to be used

  • Borax                         
  • Oxiclean                                 
  • Dishwashing liquid (optional)
  • Measuring cup          
  • Bleach (optional)
  • Cotton rags                            
  • Toothbrush
  • Bucket
  • Dental floss

An Overview of the Process:

1. Flush out sludge or bacteria

2.  Clean jetted tub with Oxiclean

3. Turn the air-induction valves off

4. Flush the tub once again

5. Use borax to clean jetted tub and scrub it gently

6. Clean the tub’s jets with a toothbrush

Now that you have an insight into the methods and process keep on reading for a quick and easy step-by-step guide on the best way to clean your jetted tub!

Steps for Cleaning a Jetted Tub

We have presented the process of cleaning the tub in easy steps so that you get the best out of your efforts in no time.

Step 1. Flush Out Sludge or Bacteria

Start with Wiping off any hairs or even other particles and debris from the rim or basin.

READ NEXT:  Best Way to Clean Fiberglass Tub (With a Bonus Method)

Then fill in the tub enough for the water to sit at least a few inches right above the jets (If it has been some time since you last sanitized and cleaned the tub, it’s better to fill it with hot water.)

Once the tub is filled with water, you have several choices for cleaning agents (It’s advisable to check the manufacturer’s guidelines first)

Step 2: Clean Jetted Tub with Oxiclean

clean jetted tub with oxiclean

Method 1

The first choice is to add approximately a cup of OxiClean to the water.

Unlike some other commercial cleaning products, Oxiclean is an excellent cleaning product that doesn’t contain any harsh chemicals.

It has a green-friendly and safe cleaning solution for your jetted tub, which can easily dissolve any buildup and bacteria without harming your tub’s parts.

Method 2

If you don’t have any OxiClean, another option is adding a 1/2 cup of bleach with some teaspoons of liquid or powdered dish-washing detergent.

READ NEXT:  How to Clean Washing Machine with Bleach

But take note that certain manufacturers don’t recommend bleach since it can dry out the gaskets over a period of time.

Or you can simply buy a commercial product intended for cleaning jetted tubs.

Step 3: Turn the Air-Induction Valves Off

Once you are done with the first part, it’s now time to turn on the jets.

But remember to switch the air-induction valves off before doing so (unless your tub’s manufacturer specifically instructs you to leave them open.)

The closing of the valves allows the water to flow via the tub’s internal plumbing.  This centers the flow, which contributes to a deeper cleaning.

Turn the jets on full for about 10 -13 minutes with the valves shut (or not) or just until the debris from the inner plumbing ceases streaming into the water.

Step 4:  Flush the Tub Once Again

After conducting the second step, thoroughly drain the tub’s water.

READ NEXT:  How to Clean Shower Drain of Hair in a Hassle-Free Way

Once you have dealt with the feeling of disgust which you felt over the number of filth that has filled the tub basin, load it up once again with warm or hot water just a few inches above the tub’s jets.

Turn the tub on full once again for another 10 to 13 minutes to help wash out even more gunk and debris.

Drain the water.

Step 5:  Use Borax to Clean Jetted Tub and Scrub It Gently

borax to clean jetted tub

Alright, it’s now time for some classic-old brushing (sadly, no one has ever found a method to absolutely clean a jetted tub in a no-effort, hands-off way.)

Take a soft cloth and some borax; the product works well to break up mildew, mold, and soap residue.

Within the tub, apply a generous amount of borax, let it stay for a few minutes, and then utilize the smooth, dampened cloth to wipe and scrub the sludge away.

READ NEXT:  What to Do If Down Pillow Smells After Washing?

You may also easily use the borax on the water tap and drain it too.

As you perform this, make sure you don’t scrub too hard.

Many whirlpool tubs are built of acrylic, a component that (if you’re not gentle) can be gouged or scratched, not immediately, but can still possibly happen.

Step 6:  Clean the Tub’s Jets with a Toothbrush

You have certainly come a long way!

However, there’s one last task to do in order to combat the sludge and bacteria that can be trapped around and in the water jets.

Using a toothbrush, gently scrub the device’s nozzles and as well as the curved trim.

 If you’re seeing residue on a nozzle but cannot penetrate it with the toothbrush, try to detach it with a string of dental floss.

Remember as well to clean the air-intake lid by disassembling it. Give it a soapy scrubbing, rinse it off and screw it right back into place.

READ NEXT:  Can You Flush Hair Down the Toilet - Quick Guide

Finally, do a thorough rinsing on the tub.

The Quickest Method

If you’re looking for another quick alternative and would save you time, you can give a Biofilm Remover a try!

Biofilms are Slimy particles of microbes that adhere to wet surfaces and could cause a skin infection, so it’s vital to remove them.

Utilizing a biofilm remover could not only sanitize the jetted tub but also clean it in the process.

Cleaning Your Jetted Tub with a Biofilm remover

1. Cleaning Your Jetted Tub with a BioFilm Remover

2. Obtain a liquid biofilm removal and scan the bottle’s instructions.

3. Fill in the tub with 2–3 inches hot water right above the jets  

4.Pour in the specified quantity of the biofilm remover into the water and switch the jets on.

READ NEXT:  How To Fix A Swiffer Wetjet That Won't Spray? - Best Solutions

5. Rotate operating the jets and let the tub rest at intervals of 30 minutes.

6. Drain the water in your tub and wipe off any residue left around the edges.


You are finally finished at last! Compensate yourself with a relaxing bath since you deserve it.

But take note, if you would like to make the most out of your jet tub, sanitizing and cleaning once-in-a-blue-moon is not enough.

The secret is regular maintenance. If your tub is only occasionally used, cleaning it about four times a year might get you by.

But if you enjoy whirlpool baths regularly, follow the method mentioned above or at least once a month. 

Now that you know the best way to clean a jetted tub, you can assume the operation will go much smoother next time you clean it.

Read Next: Learn how to clean Shower drain of hair in easy steps!