- Can You Flush Toilet Seat Covers or Not? - September 15, 2023
- How to Make Sure Gas Stove is Off? – Quick Methods - September 15, 2023
- Can An Air Mattress Burst or Not? – (Little Known Facts!) - September 15, 2023
Oxiclean has so many purposes and because of that, a lot of people have asked the question “can you put OxiClean in toilet bowl?” several times.
You might be familiar with OxiClean as the famous stain removal for your laundry and, occasionally, your versatile stained surfaces.
But no one says anything about using it to clean the toilet bowl, luckily for you, this writer is about to remedy that.
Since OxiClean is a cleaning agent, one would assume that it can be used for cleaning anything, and they are right.
So to answer the question of the day, yes, you can use OxiClean in the toilet bowl. But it can only be used under certain circumstances that would be discussed further in this article.
Can You Put Oxiclean In Toilet Bowl?
Before we jump right into this article, let’s talk about OxiClean. If OxiClean is truly a cleaning agent, why should its use be questioned?
Oxiclean, as I said earlier, is a cleaning agent popular for its fast-action stain removal.
It is mostly used for laundry and surface stains but that doesn’t mean it is limited to just that.
The thing is, OxiClean is oxygen bleach which makes a lot of people weary to use it.
But what most people are unaware of is that, unlike normal bleach, Oxiclean can get rid of stains without attacking the surface on which it has been applied.
This makes it environmentally safe for all cleaning purposes, including using it for your toilet bowl.
Now that we are fully aware of the usefulness of OxiClean and its effect on our toilet bowl, we can now move on to the next part of this article.
How To Use Oxiclean To Clean Toilet Bowl
There are two reasons why people use OxiClean for their toilet bowl. The first is for disinfecting, and the second is for stain removal.
This article would be discussing how to use OxiClean based on what you are using it for.
As A Disinfectant
Using OxiClean as a disinfectant is pretty much simple. It doesn’t require that much stress or vigor.
Here are the steps involved.
Step #1: Get Your Cleaning Agent In Order
There are different types of OxiClean, ranging from liquid to solid powder.
When using liquid OxiClean, all you have to do is transfer it into a spray bottle.
Luckily for you, most of the liquid OxiClean products come in spray bottles. If you feel it is too concentrated, you can dilute it in water before putting it in the spray bottle.
You can also make use of OxiClean powder on toilet bowl.
If you are making use of the powder one, it is advised to dissolve one scoop in a gallon of water and leave for some minutes to fully mix.
Tip: It is best to make use of liquid OxiClean when disinfecting rather than powder.
Step #2: Spray On The Surface
After getting the solution ready, you proceed to spray on the surfaces you want to disinfect.
Be generous with the spray because the more the merrier and you can also decide to spray in proportion, that is also fine.
After spraying, leave it for a while. This would give it more time for disinfecting.
It is totally optional because it rarely affects the outcome of the disinfecting but I’m always a little bit extra so I like to wait.
Step #3: Swipe Away
Yes, you heard me. The next thing after spraying is to swipe the surfaces meticulously, wiping out any trace of OxiClean that could remain.
You can do this as often as you want because it kills 99.9 percent of germs and some other viruses, in addition to reducing the possibility of having stains.
Tip: You can spray the toilet bowl and wipe it simultaneously if you want.
As A Stain Removal
Sometimes we get stuck with stains that are hard to get rid of.
Some of them are a result of the reaction of the toilet bowl with extreme cleaning compounds like chlorine bleach and the like.
Those stains are almost impossible to remove in most cases. Thankfully, we are fortunate enough to have OxiClean at our aid.
Here are the steps involved in using OxiClean to remove stains in our toilet bowl.
Step #1: Wash The Toilet
The first thing to do when trying to get rid of stains is to wash the stained surface.
It is best to have a clean surface free of any substance whatsoever before proceeding to the next step.
Step #2: Make A Solution
This might be a little bit dramatic, but to be able to get the best result in one go a little extra is necessary.
This is why a solution of bicarbonate of soda, OxiClean, and salt is needed.
The mixture is made of all those constituents in a ratio of 1:2:1, the 2 being the OxiClean. This means for every cup of salt and baking soda, cups of OxiClean are needed.
Tip: The toilet bowl is washed beforehand to prevent the mixture from reacting with other dirt.
Step #3: Apply And Wait
The beauty of OxiClean is the fact that it is basically oxygen bleach making it wonderful for stain removal.
You see, the oxygen in the bleach targets the stain specifically and not the material to which it has been applied on.
This means you don’t have to stress yourself with scrubbing and the like.
That is the difference between it and chlorine bleach, aside from the fact that the latter attack all surfaces, stained or not.
So after making the mixture, all you have to do is apply it on the stained surfaces and let chemistry do the cleaning.
This might require you to wait for some minutes, 20 at most, but I promise it is worth the wait.
Step #4: Rinse Off
Once you’ve waited enough for chemistry to do its part, you can then proceed to rinse off the surface by flushing the toilet.
In some rare cases, the stains are too strong to come off at once.
In those instances, you can apply as often as you want till the stains are permanently gone.
Tip: Be careful while making use of the mixture as it can be used at any time but not too often.
What Other Products Can Be Used In The Toilet Bowl?
Different products are equally as effective when used on toilet bowls. Here are the commonly used ones.
Though it might not be effective in every case, citric acid is a wonderful stain removal because of its acidic properties.
White Vinegar And Baking Soda
Spray about a cup or two of vinegar on the toilet bowl and add some baking soda on top.
Use an old toothbrush to scrub the stained areas and rinse off when done with the scrubbing.
Borax And White Vinegar
Borax is generally known as a cleaning agent used in various products but what you don’t know is that the raw form is quite potent.
Mixing it with vinegar would give you the perfect cleaning mixture.
We have products that can be used alone, like citric acid, and those that are applied in mixtures, like white vinegar and baking soda.
Whichever one you choose, they can be equally as effective as OxiClean.
Note: Borax and vinegar are used the same way vinegar and baking soda are used but have a longer-lasting effect.
There are so many products we make use of to clean our toilet bowls, and now we can say for sure that OxiClean has been added to that list.
Not only is it good for cleaning toilet bowls, but you can also use it to clean almost anything, which is why it is best to always have one at hand.
With all that has been said so far, I can now confidently ask you, my dear readers, the same question you asked earlier “can you put OxiClean in toilet bowl?“