- Can You Flush Toilet Seat Covers or Not? - September 15, 2023
- How to Make Sure Gas Stove is Off? – Quick Methods - September 15, 2023
- Can An Air Mattress Burst or Not? – (Little Known Facts!) - September 15, 2023
Do you know how to fix a Swiffer wetjet that won’t spray? I bet you don’t!
In this post, we’ve analyzed the reasons why a Swiffer wetjet won’t spray, and how you can resolve this issue.
If your Swiffer wetjet won’t spray, first, check the battery compartment to ensure that the batteries are properly installed. Secondly, check the fluid tank to make sure it is properly filled with the cleaning solution.
To know more details about the steps to fix the issue, read the next part of the article.
Why Is My Swiffer WetJet Not Spraying?
There could be several reasons why your Swiffer WetJet is not spraying.
Here are a few reasons:
- Battery issue
- Reservoir issue
- No cleaning solution
- Nozzle issue
- spray trigger issue
- Leaks in the system
- May need a system reset
Can You Fix A Swiffer Wetjet That Won’t Spray?
In most cases, it is possible to fix a Swiffer Wetjet that is not spraying. The solution may be as simple as filling the solution tank or cleaning the nozzle.
However, if these simple solutions do not work, it may be necessary to replace the battery or the nozzle.
If you are still having trouble after trying these solutions, you can also try contacting Swiffer customer service for further assistance.
They may be able to provide additional troubleshooting tips or help you determine if the issue is with the device itself and if it needs to be repaired or replaced.
How To Fix A Swiffer Wetjet That Won’t Spray + Solutions
Here are a few ways you can troubleshoot the issues with a Swiffer wetjet that won’t spray.
Problem #1: Battery Issue
If your Swiffer WetJet’s battery is not working properly, there are a few things you can try to troubleshoot the issue.
Option 1: Check Battery Installation
Make sure the battery is properly installed. Check that the battery is seated correctly in the battery compartment and that all connections are secure.
Option 2: Charge the Battery
If the battery is low on charge, it may not have enough power to run the Swiffer WetJet. Try charging the battery according to the manufacturer’s instructions.
Option 3: Check the Battery for Damage
If the battery is damaged, it may not function properly. Check for any visible damage, such as cracks or leaks, and replace the battery if necessary.
Option 4: Check the Power Supply
If the battery is fully charged and properly installed, the problem may be with the power supply.
✅ Make sure the power cord is securely plugged into the Swiffer WetJet and into a functioning outlet.
If none of these troubleshooting steps help, it is possible that the battery or the power supply is malfunctioning.
In this case, it may be necessary to replace the battery or contact the manufacturer for assistance.
Tip: The battery should be properly installed and should be charged as well. If it has low battery, it may not have enough power to spray the solution.
Problem #2: Reservoir Issue
If the reservoir is not functioning properly, it may be clogged or not properly seated in the device.
Here are some steps you can try to fix the issue:
Check If Reservior Is Properly Seated
Check to make sure the reservoir is properly seated in the device. The nozzle should be aligned with the opening in the base of the WetJet.
If the reservoir is properly seated, try cleaning the nozzle with a toothbrush or cotton swab.
Sometimes debris can build up and clog the nozzle, preventing the solution from flowing properly.
✅ If the nozzle is clean and the reservoir is properly seated, try removing the reservoir and cleaning it with warm, soapy water.
Rinse thoroughly and allow it to dry completely before reinserting it into the WetJet.
To check if the Swiffer WetJet reservoir is properly seated, you should check the below options:
- Make sure the WetJet is turned off and unplugged from the outlet.
- Lift the handle of the WetJet to the upright position.
- Locate the reservoir at the back of the WetJet. The reservoir is the container that holds the cleaning solution.
- Grasp the reservoir and pull it straight out from the WetJet.
- Inspect the bottom of the reservoir to ensure that it is seated properly in the WetJet.
- The bottom of the reservoir should have a series of tabs or protrusions that fit into corresponding slots or holes on the WetJet.
- If the tabs on the bottom of the reservoir are not aligned with the slots on the WetJet, gently press down on the reservoir until it snaps into place.
- If the tabs on the bottom of the reservoir are broken or damaged, the reservoir may not be properly seated.
- In this case, you will need to replace the reservoir.
Once you have verified that the reservoir is properly seated, you can reinsert it into the WetJet and continue using the cleaning tool as usual.
Note: If none of these steps help, there may be a more serious issue with the WetJet. In that case, you may need to contact Swiffer customer service for further assistance.
Problem #3: No Cleaning Solution
Make sure that the solution tank is properly filled with the cleaning solution and that the tank is properly seated on the base of the WetJet.
If the solution tank on your Swiffer WetJet is not properly filled with cleaning solution, you can try the following steps to fix the issue:
- Make sure that the solution tank is properly seated on the WetJet. It should snap into place and be secured on the bottom of the handle.
- If the solution tank is not properly seated, remove it from the WetJet and reattach it, making sure it is secure.
- Check the solution tank for any cracks or damage. If the tank is damaged, it will need to be replaced.
- If the solution tank is undamaged, fill it with the recommended amount of cleaning solution.
- The Swiffer WetJet solution tank should be filled with the cleaning solution up to the fill line, which is marked on the side of the tank.
- Once the solution tank is filled with the recommended amount of cleaning solution, reattach it to the WetJet and test it to ensure that it is working properly.
Tip: If you continue to have problems with the solution tank not properly filling with cleaning solution, you may need to contact Swiffer customer support for further assistance.
Problem #4: Nozzle Issue
If you are experiencing an issue with your Swiffer WetJet nozzle, there are a few steps you can try to fix it.
First, remove the nozzle from the Swiffer WetJet by pulling it straight out. Then, rinse the nozzle under warm water to remove any debris or dirt that may be clogging it.
✅ If the nozzle is still clogged, try using a small pin or needle to gently clear the opening.
Be careful not to apply too much pressure, as you don’t want to damage the nozzle. If the nozzle is still clogged after trying these steps, you may need to replace it.
You can purchase a replacement nozzle from the Swiffer website or a store that sells Swiffer products.
If you have tried these steps and are still experiencing an issue with your nozzle, you may want to contact Swiffer customer service for further assistance.
To unclog your Swiffer WetJet nozzle, follow these steps:
- Remove the nozzle from the Swiffer WetJet by pulling it straight out.
- Rinse the nozzle under warm water to remove any debris or dirt that may be clogging it.
- If the nozzle is still clogged, try using a small pin or needle to gently clear the opening. Be careful not to apply too much pressure, as you don’t want to damage the nozzle.
If the nozzle is still clogged after trying these steps, you may need to replace it.
You can purchase a replacement nozzle from the Swiffer website or a store that sells Swiffer products.
Tip: Check to make sure that the nozzle is not clogged. If the nozzle is clogged, you can try cleaning it with a needle or pin.
Problem #5: Spray Trigger Issue
Check to make sure that the spray trigger is not stuck in the “off” position. If the trigger is stuck, try pressing it several times to see if it will release.
Here are a few things you can try to fix the spray trigger:
- Make sure the battery is fully charged. If the battery is low, the spray trigger may not work properly.
- Check the water tank and make sure it is full. If the water tank is empty, the WetJet will not spray.
- Make sure the cleaning solution is properly mixed. If the solution is too concentrated or not mixed well, the WetJet may not spray properly.
- If the WetJet has not been used in a while, the spray nozzle may be clogged.
- Try running hot water through the nozzle to clear any debris that may be blocking it.
Note: If none of the above steps fix the issue, the spray trigger itself may be broken. In this case, you may need to replace the spray trigger or contact the manufacturer for further assistance.
Problem #6: System Leak
Sometimes, it might be that there is a leakage in your Swiffer wetjet system, which is causing it not to spray.
If your Swiffer Wetjet is leaking, there are a few possible causes:
- Make sure the tank is securely attached to the base and that the seals are in good condition.
- If the tank is cracked or otherwise damaged, it may be leaking. If this is the case, you will need to replace the solution tank.
- If the pump is not working properly, it may be causing the solution to leak. In this case, you may need to contact Swiffer customer service for further assistance.
- If the nozzle is clogged, the solution may not be able to be dispensed properly and may leak out of the tank.
- Try cleaning the nozzle with a small brush or toothpick to see if this helps.
Problem #7: Swiffer Wetjet May Need System Reset
If your Swiffer Wetjet is not functioning properly, it is possible that it may need to be reset.
Here are the steps you can take to reset your Swiffer Wetjet:
- Remove the battery from the Swiffer Wetjet.
- Leave the battery out for at least one minute. This will allow the device to fully reset.
- Reinsert the battery into the Swiffer Wetjet.
- Turn the device on and see if it is functioning properly.
Note: If these steps do not help, it is possible that there is a problem with the device that cannot be fixed by a simple reset.
In this case, you may need to contact Swiffer customer service for further assistance.
Conclusion
At this point, you should’ve known how to fix a Swiffer wetjet that won’t spray. It is important to learn how to handle a few troubleshooting by yourself.
This can be helpful when you don’t have a technician in your neighborhood. I hope you found the solution and the above steps helpful.