- Can You Flush Toilet Seat Covers or Not? - September 15, 2023
- How to Make Sure Gas Stove is Off? – Quick Methods - September 15, 2023
- Can An Air Mattress Burst or Not? – (Little Known Facts!) - September 15, 2023
Damp Be Gone! No matter where you’re from, learning how to get rid of damp in bedroom is a chore.
We all wish we could have a permanent vacation, especially if we live near the water like the dark and wet Pacific Northwest or hot and humid air in the South.
A damp bedroom sets the perfect home for a smelly piece of mold to grow. Lucky for you, I have the best damp bedroom solutions around!
After reading this, you’ll learn how to sense dampness before it begins to grow untreatable mold, where it tends to breed, and the best ways to get that lovely home smell back!
The key to getting rid of dampness in the bedroom is to ensure all surfaces are clean and dry. Setting up a habit of wiping, removing dust, and keeping the area ventilated should be enough to get rid of dampness.
You’ve probably cleaned that moldy spot around your window sill over one hundred times. And you still notice the dampness in the bedroom or bathroom corner.
Damp air lives practically anywhere. It is a combination of moisture, water, and condensation enclosed into a building without means to escape.
Damp is so natural that it exists all around us. It appears quickly and poses a severe threat to our most prized possessions and living spaces.
Mold is as organic as produce at the grocery store. It belongs to the natural environment living both indoors and outdoors.
Outdoor mold helps break down fallen trees and doesn’t pose much threat. Indoor mold, on the other hand, does.
Indoor mold breeds by spreading tiny invisible spores through the air. They tend to land on wet, moist, or humid areas because they provide the safest place for them to grow and multiply.
Note: Just like us, mold cannot survive without water!
Spotting Damp in Your Bedroom
Noticing indoor damp is more obvious to spot than outdoor damp.
Because indoor spaces are enclosed, protected from the outside environment, and have plumbing systems throughout the areas that distribute airflow.
Dampness is most commonly found in your home during the winter months when the outside air is the coldest, and your home is the warmest.
Humid environments alike include temperate rainforests like the Pacific Northwest, swampland in Florida, and jungles in Hawaii.
You’ll Find Musty Odors
Damp areas often carry a pungent, musty, natural, and earthy scent when mold or mildew flora begins to grow.
Unfortunately, the smell often gets mistaken for sweaty yoga mats, stinky work boots, or wet pieces of clothing that accidentally fall between the washer and dryer.
Note: Other molds smell sour or ferment –yeasty, tangy, vinegar.
Your Head Might Hurt
Migraines and headaches could signify that the damp in your bedroom is growing mold.
Mold spores are tiny and transparent, able to stick to the respiratory system with ease.
The spores tend to irritate the immune system and trigger an inflammatory response in the sinuses.
As a result, you may experience headaches, fatigue, nausea, or dizziness.
Condensation Around the Window
Condensation tends to puddle around window seals, where high moisture levels accumulate.
You will also find condensation around other damp areas such as the bathroom, kitchen sink, and basement.
Stains cannot be removed once the condensation turns into water, and damp-free should replace damaged goods.
In addition, water spots can appear around windows and damage surrounding surfaces and objects.
Other Common Areas of Damp Can Hide:
- Roof gutters and downpipes can back up with debris, dirt, and grime.
- Ceilings, attics, floors, and basements have naturally occurring wet conditions.
- Wardrobes tend to trap condensation for their lack of poor air circulation.
- Bedroom corners and walls could be a sign of damaged pipes and cracks or simply water seeping inside your home from the outside.
How To Get Rid of Damp in Bedroom
Step #1: Assess your home for potential plumbing leaks, gutter backup, and other water problems.
Step #2: Put protective equipment (N95 respirator, long gloves, goggles) and begin to clean and completely dry all salvaged items.
Step #3: Remove mold from areas using detergent with water, and dry thoroughly.
Replace and dispose of contaminated goods like carpet, drywall, wallboard, ceiling tiles, infected upholstery, etc.
Step #4: Once dry, paint over the once moldy area and let dry (painting unclean mold areas will damage the original surface and peel the new paint away).
Tip: Close the windows and turn on a fan or air conditioner for an arid surface
Step #5: Pursue a damp specialist for water restoration, carpet cleaning, and more for inspection if the signs and symptoms of dampness as mentioned earlier continue to occur or are made worse.
Remember when I mentioned that mold could not breed inside homes that are not moist and wet?
Well, they’re not producing. So having damp areas in a bedroom will not likely cause health problems.
When you begin to see mold grow from damp areas, expect to notice allergic reactions from people with already known allergies or asthma.
In addition, breathing in mold spores can trigger allergic reactions like itchy red eyes, skin rash, and in some extreme cases, black mold poisoning.
Living in a damp bedroom poses the biggest threat to people who live in wet climates, especially cold ones.
Areas that experience long cold and wet winters can expect to maintain moisture levels indoors to keep warm and dry during the rainy seasons.
Recent research has discovered sleeping under damp conditions can interfere with sleep patterns and breathing complications.
Installing efficient ventilation can help achieve better health, allowing the body to breathe in clean air for a night of better sleep.
For this reason, damp areas should not be taken lightly as an ugly stain next to your beautiful bed frame.
Note: Damp can cause respiratory infection, and children with weakened immune systems often fall ill, especially those with asthma.
Living in a wet climate means not studying how to get rid of damp and mould in the bedroom could be kind of catastrophic.
You must be diligent about regularly assessing your home for damp and mold.
Unfortunately, that means the moisture in the air will be indoors and outdoors simultaneously.
Damp air is harmless but should not be ignored if the thought comes to mind.
Damp air can become hazardous when it sits unnoticed.
Itty bitty mold spores begin to emerge and spread toxins throughout your home, traveling through the ventilation system and sticking deep into porous surfaces and fabrics.
To help manage mold and control moisture, follow these expert-approved recommendations:
- Follow the humidity levels to keep humidity levels under 50% throughout the day.
- Use a dehumidifier and air conditioner when humidity is the wettest.
- Check your ventilation for efficient airflow and moisture contamination.
- Open up a window when cooking, washing dishes, or clothes.
- Turn on the bathroom fan when showering.
- Cover cold surfaces with insulation
- RMR-86 Instant Mold and Mildew Remover has a range of sizes for whatever project and is ready to use. No scrubbing away mold. Just spray directly to the damp area, wipe and let dry.
- Home Armor Mold and Mildew Remover contain a bleach-free technology that removes damp stains so you can save your favorite rug in just 5 minutes.
- CLR Mold and Mildew Remover is the best all-purpose damp cleaner suitable for tile, fabric, and painted walls.
Read Next: Why My Bedsheet Feels Damp?
Learning how to get rid of damp in bedroom is not easy, but it is a chore worth doing when it allows you to watch into a home with that fresh home smell.
The key to living a life damp-free is catching it before it’s too late.
So it would be best if you started investigating when you begin to smell armpits lingering around your bedroom, sneeze more, or notice damp spots.
Waiting too long to get humid conditions under control could mean sacrificing your favorite snowboard bag, or even worse, you may have to replace your roof!