how to make paint cure faster
Kristina Davis

Do you want to know how to make paint cure faster? If so, then you are not alone.

The process of evaporating solvents or water from your coating is known as drying. Your paints will feel dry as a result of this.

Curing, on the other hand, occurs when the coating reaches its total hardness. Therefore, failure to accomplish a complete cure can lead to the coating’s advantages not being fulfilled.

READ NEXT:  Wait a Second! What Happens If You Don't Paint Over Primer?

If you are looking to get back into the swing of things in your home, then making paint dry faster should be high on your list of priorities.

There are many ways in which you can do this, both internally and externally, and in this blog post, we will cover all of these methods and more,

So read on for some great ideas!

The Best Ways to Make Paint Cure Faster For Internal Spaces

internal spaces

Internal painting can be a great way to spruce up your home for the outside world or just a much-needed change of décor.

But while this will be an exciting and rewarding experience, it can also be quite frustrating if you are not aware of how long paint is going to take before curing.

It’s important to know when painting inside; the paint solution tends to dry longer since it has less air circulation compared to work done outside.

This means that it will take a lot longer for the paint inside your home to dry and cure than if you were painting on the exterior of these spaces.

READ NEXT:  What Paint Color Goes With Black Furniture? Different Color Tips!

Fortunately, reviewing the options below will help expedite the process!

Option #1: Applying Light Coats Only

One mistake many inexperienced homeowners tend to make when pairing is to apply a heavy, thick coat of paint to the surface.

They think that this will save them more time from having to repaint but that isn’t true as this will make the paint dry much slower than intended.

If this happens, it’ll take a lot longer for it to cure fully before you can seal with varnish or wax.

To get better results, take note of the tips below:

1: Only apply light coats of paint. This will ensure that the entire surface is coated evenly with a thin layer of fresh paint, which in turn will allow it to cure at its fastest rate possible.

READ NEXT:  How Long To Let Paint Dry Before Hanging Pictures? - Complete Guide

2: One way you can apply light strokes is to use a brush with soft bristles, which will also permit the paint to level out nicely and avoid any globs.

3: The last thing you’ll want to do is apply too many thin coats of paint without giving it enough time to dry in between each one.

4: If your surface has been painted for at least one hour but still feels tacky to the touch, wait at least two hours before applying another thin coat of paint.

Following all these tips will ensure that the paint will have enough time to dry and set properly.

Option #2: Be Sure to Decrease the Humidity

decrease humidiity

One of the factors that can make a painted wall set longer is when the air is humid because humidity can add moisture to the paint, which will slow down the drying process.

Therefore, if you’re having trouble with your new freshly-painted wall feeling a little wet and tacky even after hours of waiting, try lowering the humidity in the room.

There are many ways to decrease humidity levels in your house, and the easiest way is by investing in a dehumidifier, which works by removing the excess moisture from the air.

Alternatively, you can try some of the following steps:

  • Open windows for ventilation and let air in the room.
  • Use air conditioning units to dry out the room.
  • Turn on your fans and make sure they face the windows.
  • Decrease humidity by using insulation to keep moisture levels down.
READ NEXT:  Is It Safe To Store Paint In The House? A Complete Guide

Option #3: Utilize Your Heater

Although this isn’t a highly recommended method, it still works for those who are pretty in a rush to have their painted walls dried and cured.

Heaters are a way to speed up the process of drying since it can create a dryer environment, which in return speed up drying and curing.

However, the downside is that if you have a heater on, your room could become dryer than it should be.

This means cracking or peeling paint will happen more often, so keep an eye out for those signs and put some moisture back into the air before they start happening.

Here’s how to do it:

  • Start by turning your heater into the lowest settings.
  • Have the heat run for only an hour or two.
  • Once the time has passed, open the windows to remove the heat.
  • Check your paint if it has dried. Repeat until results show.
READ NEXT:  Why Is My Paint Brush Shedding Quickly?

Now, if your concern is curing an exterior painted wall, then don’t worry because we still got that covered here!

Read on ahead to know more.

Section Summary

In this section, we’ve learned the various ways of expediting the curing process of paint by applying light coats, decreasing humidity levels, and making use of a heater to establish a dry environment.

The Methods to Make Paint Cure Faster For Exterior Spaces

exterior spaces

When it boils down to exterior painting, you’re at much of an advantage, given that the outer part of your home is exposed to a lot of sunlight and wind.

However, there are still a few factors that can hinder the drying and curing process, especially when you're in an humid area.

So in this section, you’ll learn about the two most effective and proven ways on how to make exterior painted walls dry faster.

READ NEXT:  Spray Paint vs Brush Paint Furniture - Which one is better?

Check the methods below:

Method #1: Utilize Water-Based Paint

We all know how long oil-based paints can take to dry because they’re more heavily pigmented.

But when you use water-based paint, it’ll dry much quicker because of its light texture and lower pigment content.

This type of paint will also produce fewer fumes, which is a bonus for those who want to have a healthier environment inside the house.

However, the downside is that they might not be as durable and glossy as oil-based paints can offer.

But if you want something that can cure quickly and make your house stand out among the neighborhood, then, by all means, go for the water-based paint.

READ NEXT:  What Can I Use Instead Of a Sponge For Painting? A Complete Guide!

Method #2: Make Use of The Weather

When painting your outer walls, the thing you must never forget is to use the weather to your advantage.

The kind of weather when you’re painting will have a massive effect on the paint’s drying process.

If it is raining or if there is a lot of wind, then the paint will dry slower because rain and wind affect the surface tension.

This will then affect how fast the molecules can move to form an even coat on your wall.

On the other hand, when painting during sunny days with little winds around, you can expect the paint to dry faster because of the heat, so be sure you’re always keen on the weather.

New Understandings

READ NEXT:  What Can I Use Instead Of a Sponge For Painting? A Complete Guide!

This section has taught us that to guarantee a faster curing and painting process for exterior walls, you need to use water-based paint and keep a good eye on the weather to bring it to your advantage.

Now that we finally have everything covered, it’s time for you to go out and paint your walls with the knowledge that this guide had to offer!

But before that, let’s have our…

Read Next: How to Use Paint on Outdoor Wooden Bench?

The Final Words

Painting is indeed a tiresome task, but in order to give our home the best that it needs, then it’s time to buckle up and get painting.

We’ve covered the whole process from start to finish, all in hopes that it will be a much easier journey for you, and now that you finally know how to make paint cure faster, we’re confident that you’ll be able to create the masterpiece that your home deserves!