- Can You Flush Toilet Seat Covers or Not? - September 15, 2023
- How to Make Sure Gas Stove is Off? – Quick Methods - September 15, 2023
- Can An Air Mattress Burst or Not? – (Little Known Facts!) - September 15, 2023
How to Spray Paint Furniture Without Sanding? Painting your wooden furniture is one of the best ways to transform it into a modern or unique look drastically.
However, sanding is a challenging and exhausting job to do.
We cannot emphasize enough the stress of sanding in achieving the finish you want for your furniture.
However, there are easy and reliable steps to paint your wood furnishings and skip the sanding process.
Test the tint on the surface before spray painting to avoid wastage. Lessen your work by following the steps and tips below.
How to Spray Paint Furniture Without Sanding
Finding the right furniture that looks good and perfect in our house is very challenging. Some people prefer to make their own or restore old fixtures.
Painting it is the best option you can have if you want to design it personally, but sanding will consume a lot of your time to finish the whole process.
Some furniture has an intricate design and complex style, which makes it hard to furnish every nook and cranny.
After sanding, cleaning it up will be a pain, you can still find some sand all over your workplace as if getting rid of it entirely is impossible.
Worry Not! Read the next steps to get this issue fixed.
So, let us learn how to start the painting process without sanding your furniture anymore.
1. Prepare the Right Equipment
Before anything else, secure and check if you have the appropriate equipment for spray painting.
Other than that, there are necessary materials you need to avoid the clutters in your working area.
These tools and materials can help you in achieving the finish of wood furniture.
Equipment for Spray Painting includes:
- Spray Gun
- Filter for Spray Gun
- Air Compressor
General Tips Before Spray Painting
- Set up a space where you will spray tints with newspapers to avoid dyeing the floor or walls.
- If you own a spray gun with multiple fluid nozzles and air caps, verify if the cap and nozzle are suitable for the paint’s viscosity and the wood’s finish.
- Adjust the air pressure and look for the best technique in adding color to the wood furniture to achieve the look you want.
2. Clean the Surface
First thing first, prep the furniture. Remove handle, screws, and other stuff. Disassemble it if necessary.
Before spray painting your wooden furniture, start with a thorough cleaning. It is essential to get rid of the accumulated dirt after the assessment of the furniture.
You can clean the surface by using a gentle cleanser, such as dishwashing soaps.
You might also opt to remove the stains on your furniture by mixing baking soda and water to create a thin paste. In cleaning carvings and moldings, you can utilize a brush instead of a sponge.
This way, you can reach the parts where the towel and sponge may not match. Once you are done, dry the furniture using a clean towel.
3. Prep the Furniture with a Primer
Before coloring your furnishings, cover them with primer as a preparatory coating.
Utilizing a primer can increase the durability of the paint and can ensure better adhesion. Plus, it protects the quality of the wood.
To help you choose the best primer for your furnishings, these are the three types of primer:
- Oil-based: This type of primer has been in the industry for decades. It works fine with oil and latex tints. Moreover, it is widely applied on different surfaces.
- Latex-based: It is a water-based type of primer that offers flexibility. It is also fast drying and less susceptible to cracking.
- Shellac Primer: It has been used globally to seal the wood and other surfaces.
Use primer; it will save you for not sanding the furniture. Make sure to do it in an open space or open the window to let that stinky smell be gone.
There is a variety of primers available in the market. Some primers have stains with them.
You can spray it directly to the furniture, and it dries up pretty quickly too. Just don’t forget to shake it well before applying.
4. Prep with a Liquid Sander
Liquid sandpaper, also known as deglosser, is a chemical-based solution that diminishes the wood surface’s glossy layer.
It enables you to dye it without using physical sandpaper.
Although liquid sander cannot smoothen the wood surface and correct flaws, this will work as gloss remover.
It basically prepares the furnishings for a new coat of tint or varnish. It is also used as a preventive measure from chipping off or cracking.
One of the primary advantages of utilizing deglosser is that it consumes less time to prep the fixtures for staining.
Once you have cleaned your item, you can start applying the liquid sandpaper to a towel or sponge. Wipe the entire area of the fixture and wait until it dries.
This will be the best option if you are working on an intricately designed item.
5. Select the Appropriate Spray Paint
Utilize Milk Stains with Bonding Agent
Skip the long process of sanding and priming by using a bonding agent mixed with milk paint powder.
You can directly add the bonding agent into the tint. This natural stain for wood fixtures has a thin texture.
If you opt to have a nontoxic pigment, this dye is made from milk protein. However, not all hardware stores offer or provide this stain.
Milk dye can be procured in powder form or pre-mixed. What’s good with this product is that it is nontoxic and biodegradable dye, which is excellent for wood furniture.
Other than that, milk stain delivers a velvety and matte finish. This eco-friendly dye does not have fumes and can produce an antique look.
Use Chalk or Mineral Paint
If you opt to dye without prepping the wood, adhesive chalk dye is your best option. Save time by not sanding at all. This dye can dry fast.
Moreover, it is popular because of the matte and chalky finish of the furniture after spray painting it. If you want to give your items a shabby-chic and vintage look, go for this tint.
On the other hand, you can also use mineral tint, which is durable and waterproof.
Plus, you won’t need to prep the item before putting this stain on top of the surface. There is also a fusion mineral tint, which has a built-in topcoat.
It means that you do not need an additional product to seal the color of your furnishings. This product’s downside is its price, but expect that it can deliver the finish you like.
Spray painting requires patience and time. Coating it once cannot give you the look you want.
It would be best to start with a thin layer of coating and gradually cover it again with the stain. Moreover, painting it in one go will only result in the dripping of the dye all over the wood.
Learn how to spray paint furniture without sanding. By simply following the tips above, you can ensure the long-lasting quality of your newly painted wooden furniture.
Spray painting the furniture without sanding still gives you the appearance that your furnishings still have this nice smooth looking surface and edges if you use quality and approved-spray dye products.
Some also prefer to use Deglosser, remove any old coating then apply a small amount of it on the wood surface, then gently spread across the whole furniture.
The bonding agent is also preferable; it works exactly just like a primer.
Read Next: Want to find another painting solution for your furniture? Check out our guide on the best paints to use on furniture.