pros and cons of hanging drywall vertically
Kristina Davis

Are there possible pros and cons of hanging drywall vertically? 

Well, hanging drywall vertically is a great way to save time and money, but it’s not for everyone.

If your walls won’t support anything heavier than say, a plywood panel, then this might not be right for your project.

While we can’t say that hanging drywall vertically is always the best option, it’s certainly not a bad one either.

It just depends on your specific situation and goals as an installer. 

One pro of hanging drywall vertically is that it adds strength to walls. But, its con is that it does not look appealing to the eyes, read along to find out more!

READ NEXT:  Can I Use Lysol on Wood? Is It Safe?

Hanging Drywall Vertically

vertical drywall

Drywall is one of the most common and versatile materials used to build walls and ceilings.

It’s easy to install drywall vertically, but there are some things you should know before doing so.

Drywall hangs vertically with:

  • The bottom edge of the sheet is attached to the floor and the top edge should be attached to the ceiling.
  • The drywall hangs vertically with the length running from floor to ceiling.
  • Drywall must be attached to studs for it to hold its shape.

What To Use To Hang Drywall Vertically

It’s recommended to use a 4-foot level, rather than a stud finder.

  • Use the stud finder to identify the location of each wall stud before hanging drywall vertically.
  • Place the 4-foot level on top of each wall stud and make sure it’s level with the ground.
  • If your drywall is plumb, there will be no gaps between rafters or ceiling joists when you hang the sheeting.
measure and mark materials

Measure and mark where the ceiling studs are. Use a 4-foot level to measure from one end of your wall to another.

READ NEXT:  Can You Use Swiffer Wet Pads On Vinyl Plank Flooring? - Find Out Why And How

The top of your wall will be where you want to hang your drywall. 

Then, mark each stud with chalk or tape so that you know where they are in relation to each other. 

Note: You would also be able to know any areas that might interfere with hanging the drywall directly above each other.

Some Pros And Cons Of Hanging Drywall Vertically

pros and cons

Hanging drywall vertically can be an amazing way to save money, but it does have its challenges as well. 

We’ll cover some possible pros and cons one can face in hanging your drywall vertically. With it, you can decide which option is best for your home.

Pros Of Hanging Drywall Vertically

A lot of contractors prefer to hang drywall horizontally and then cut it to fit vertically.

There are several reasons why hanging drywall vertically is better than hanging it horizontally:

Pro #1: Hanging Drywall Vertically Adds Strength To Walls

Hanging drywall vertically is better for seismic zones. Vertical hanging is stronger than horizontal, which means it’s better for high wind areas and high humidity areas. 

READ NEXT:  Smelling Paint When There Is None – What To Do Next?

For earthquakes, vertical hanging helps keep the wall standing upright in case of a tremor or shake.

Pro #2: Hanging Drywall Vertically Is Faster Than Horizontal

The main advantage of hanging drywall vertically is that it’s faster. Hanging horizontally takes more time and effort. 

hanging drywall faster

Hanging the dried walls vertically also makes measuring easier. With a horizontal layout, each board needs to be measured along its long edge which can be tricky. 

There’s no need to worry about cutting off an inch here or there as it won’t matter if anything gets cut off anyway! 

This makes measuring far less stressful than trying to measure long pieces with short ones stacked on top of them like they would be if hung horizontally.

Pro #3: Makes It Easier To Keep Seams Straight

Hanging drywall vertically can make a room seem larger, more open, and taller.

It’s also a nice change from the usual look of horizontal walls that you see everywhere.

READ NEXT:  How to Remove Stains From Suede Couch? Ultimate Guide

Pro #4: Save You Time And Make Your Walls Stronger

straight seams

Vertical hanging is:

FASTER – Vertical hanging requires fewer steps than horizontal hanging, so you’ll be working faster.

STRONGER – Vertical hanging will result in a stronger wall as the material is not bent or angled across the length of it, which means less stress on your material.

Tip: This also means that it is less likely for cracks or other problems to occur.

Cons Of Hanging Drywall Vertically

Hanging drywall vertically is easier and faster, but it does have its drawbacks.

Cons #1: Warping

Warping is a problem with drywall. It’s caused by the moisture in the drywall, and it can cause problems with your finished product. 

You may have noticed that your walls are slightly warped when you hang them vertically.

This can be a problem if you’re hanging them vertically on wooden studs or joists.

cons and warping walls

Cons #2: Visual Effects

Vertical hanging drywall is not a good idea for several reasons, but one of the most obvious is that it will not look good.

READ NEXT:  How To Protect Carpet On Stairs? - Best Methods!

The seams are in the wrong place and won’t match up with your floor or ceiling properly. 

Also, the vertical seams are more visible than the horizontal ones because they’re closer to eye level.

Also, they don’t blend into any other part of your space as well as horizontal ones do.

Another problem with vertical walls is that they will never be flat. The grain runs perpendicular instead of parallel to each other, which means that when you hang them on their sides.

Note: There will always be unevenness in appearance no matter how many coats you use!

Cons #3: Fasteners

The first and most important reason to avoid hanging drywall vertically is the fasteners.

wall fastener

Drywall screws are not designed for vertical application, so they will bend or break if you hang them in a way that forces them against one another. 

This can create weak points in your wall.

Cons #4: Requires More

Hanging drywall vertically is not a good idea. Here are some other reasons why:

Hanging drywall vertically requires more effort, time, and money than doing it horizontally or at an angle.

READ NEXT:  When Are Hardwood Floors Beyond Repair? - Things You Should Know!

It’s hard to match the color of the ceiling when you hang drywall vertically. 

Note: If your ceiling is painted, it may be difficult to match the color of your new drywall installation. 

Is It Ok To Hang Drywall Vertically?

hang drywall vertically

Hanging drywall vertically is common in older homes, but it’s no longer a good idea. If you’re going to hang drywall vertically, make sure you know why it’s happening and what the best way to do it is.

It’s ok to hang drywall vertically because its dimension doesn’t depend on the way it’s hung.

Drywall is hung vertically because it’s cheaper and easier to use. It also makes sense that drywall would be hung vertically as a structural wall. 

Drywall is manufactured in standard sizes, so you need to hang it in a way that fits your room.

Vertical hanging is not an issue if you’re using 1 x 3″ or 2 x 4″ sheets of gypsum board on their own without any other materials like batten or trims added on top of them.

READ NEXT:  How to Clean Microfiber Chair – Step by Step Guide

Drywall is only manufactured in certain sizes, so you have to hang it in a way that fits the room.

What you should keep in mind when hanging drywall vertically

First, drywall is only manufactured in certain sizes and shapes, so you have to hang it in a way that fits the room. 

drywall materials

This means that if you want to use vertical walls as your ceiling or wall treatment, you have to find a way of making sure they fit together properly before starting construction on them.

You can also hang horizontal pieces of drywall vertically if they’re large enough and won’t get damaged by being leaned against each other too much.

Can Drywall Be Hung Vertically

Yes, drywall can be hung vertically. One of the most common reasons people ask this question is because they want to hang it horizontally.

But don’t know which way to face the board when hanging it. 

This orientation is often used in high-traffic areas where there are more seams, such as a hallway.

Hanging the drywall landscape reduces the number of seams you’ll see in these areas.

Here Is A Tip

Drywall can be hung vertically, horizontally, or in any manner you choose.

READ NEXT:  Is American Furniture Warehouse Good Quality? The Unbiased Answer!

Just make sure the seams aren’t falling over studs, and that all of the wall sections are securely attached.

vertical drywall

If there’s an open space between two pieces of drywall, use a small bead-board filler board before attaching those pieces with screws or nails. 

This will help fill any holes that might exist between them. So they’ll look seamless once painted later on down the line.

Note: Make sure your drywall is installed over a stud and that all of the seams are not falling over these same studs. 

Conclusion

When it comes pros and cons of hanging drywall vertically? If you want your walls to be strong.

Hanging drywall vertically is one way that you can do just that. And it is also a great way to save time and energy. 

Hanging drywall vertically also makes sure that the seams are perfectly straight up or down. This means there will be less mudding or taping needed on your walls as well.

Similar Posts