- Can You Flush Toilet Seat Covers or Not? - September 15, 2023
- How to Make Sure Gas Stove is Off? – Quick Methods - September 15, 2023
- Can An Air Mattress Burst or Not? – (Little Known Facts!) - September 15, 2023
Do your bed keeps moving on wood floor and you don’t know how you can resolve it?
Fret no more because I will give you guidance as to what it is!
Furthermore, you will also get to know the reasons why this happens!
To stop your bed from moving on your wooden floor, consider repositioning the bed, adding a rug underneath the bed, using furniture stoppers, adding rubber shelf linings, or attaching the bed to the wall permanently.
Before learning how to keep a bed frame from sliding on wood floor, it’s important to understand the reason behind it first.
That way, you will easily be able to find the best and fittest solution to your problem in particular.
These reasons include:
- Lack of grip on their legs
- Position of the bed inside the room
- Movement on the bed (getting on and getting out of the bed)
NOTE: These are the top culprits, but that does not mean they’re the only reasons. There are other isolated cases that vary from one home to another.
In the event that you find your bed is constantly moving, here are 6 of the easiest, best, and most effective solutions you can perform to prevent this from happening.
Fix #1: Reposition Your Bed
The first solution is to move or reposition your bed. Most likely, the reason why it’s moving is that it does not have exterior or outside support – walls.
This was one of the first things I noticed because our bed was situated in the middle of the room.
The headboard rests, leaning on the wall, but it has ample space both left and right.
What you want to do is move your bed to the corner. This way, whenever pressure and force are put, the wall where it leans on prevents it from sliding/moving.
NOTE: If more movement happens on the left side of the bed, place your bed in the upper-right corner, and vice versa.
Fix #2: Add a Rug or Carpet Underneath the Bed
While the first fix is simple and wouldn’t require you anything but moving your bed, this next method on how to keep a bed from moving on wood floors will need a rug or a carpet.
The idea is simple – install a rug underneath the bed where the legs stand.
What this does is prevent the legs from having direct contact on the wooden floor.
So, you just want to roll up a rug or a carpet that’s big enough to accommodate all four legs, and carefully lift the part of the bed you want to install the rug or carpet on.
NOTE: Both steel and wooden bed frames will slide off pretty easily on wooden floors because they’re both smooth.
Fix #3: Use Furniture Stoppers
This next solution would require the use of another complementary material – furniture stoppers.
One thing I like about this fix would be the ease of application. You simply need to install it underneath the legs of your bed frame.
Furthermore, you’re given the flexibility to choose between multiple types and kinds of furniture stoppers, the most common ones are:
Caster Cups (Rubber)
Rubber caster cups are rubberized components that are purposely made to secure and protect walls and floors from heavy casters and furniture.
The secondary use of these cups would be to keep your furniture in place.
Non-slip pads are rubber pads designed to keep casters and other types of heavy furniture from sliding or moving across your floors.
Oftentimes, you wouldn’t have to worry about the sizing of non-slip pads because they can be cut and sized according to how you need them.
Floor Pads (Rubber)
Last, and most definitely not least are floor pads.
There are many types of floor pads in the market – you can choose from felt floor pads, melamine floor pads, burnishing floor pads, and more.
However, the best and most common are rubber pads, which are perfect for keeping furniture from slipping and moving.
You simply have to remove everything from the bed, remove the mattress from the bed frame, and then install whatever furniture stopper you feel like using.
NOTE: Out of the three, I usually go for non-slip pads because they are the most reliable and the best and easiest to find.
Fix #4: Add Rubber Shelf Linings
For this fix, what you’ll need would be similar to furniture stoppers, but they aren’t made for the purpose of it.
Rubber shelf linings are add-ons or complementary materials you use for protection – they’re usually installed on shelves to prevent stains, moisture, and scratches from external sources.
Because they’re made of rubber, it decreases friction – resulting in the prevention of sliding and moving of the bed frame.
NOTE: Unlike non-slip pads, rubber shelf linings are usually rectangular in shape and won’t fit your bed frame legs exactly. So, you would need to cut and size it accordingly.
Fix #5: Attach the Bed to the Wall
This next fix won’t need rubbers or stoppers, and instead, what you’ll need would be adhesives, nails, or screws.
Yes, you read that right, you will need these fasteners to solve the problem of your bed moving and sliding out of proportion.
I’ve tried multiple ways, but I found out that the best and most effective would be by using:
- Electrical Tapes
Yes, this is headed to what you’re imagining – you will be attaching or installing your bed directly to the wall behind it.
Follow these steps to be sure that your bed frame will permanently be installed on your wall:
- Using electrical tape, circle it around and place it onto all corners.
- Place one in the center and push it back to the wall.
- Electrical tapes are resistant, so they should be able to hold the entire bed.
- If you are going to utilize screws and/or nails, pre-drill a small hole on the headrest.
- Then, pre-drill a hole exactly where the headrest bored holes are located.
- Twist the screws in or hammer the nails down to keep the entire bed frame stationary.
NOTE: Create multiple holes for the bedrest because a single hole wouldn’t be enough to hold the structure in place.
Fix #6: Use Bed Risers
Last, and most definitely not least would be by using bed risers.
Also commonly referred to as furniture risers, the primary purpose of bed risers is to elevate the bed from the floor.
This added height can be used for multiple applications such as keeping storage under the bed, for style and quality, and many more!
What most people don’t realize is that there are some bed risers that have rubber bottoms, keeping them from sliding or moving around.
So, what you need to do is remove all linen and pillows from the bed. After that, dismount the mattress.
You just then have to install the bed risers on all four legs of your bed frame using adhesive or by screwing them down.
NOTE: When choosing your bed risers, make sure that you go with risers that have rubber bases. Choosing risers that have felt bottoms can make it more slippery than it already is.
There you have it! These are the best ways how you can keep your bed from moving every time you get on it or you get out of it.
Solving it wasn’t that hard, was it? You can, in fact, solve it within an hour!
If you ever notice that your bed keeps moving on wood floor, don’t panic – it’s not like you have to get rid of your bed frame immediately!
Proceed to do any of these things and expect your bed to be stationary in a single position.