- Should Shower Curb Match Floor or Wall Tile? – Things You Must Know! - October 9, 2022
- How To Make Polyurethane Dry Faster? – The Speedy Options - September 29, 2022
- Polyurethane Cloudy After Sanding? – Here’s How To Fix It! - September 29, 2022
It is normal to wonder does command strips work on textured walls when decorating the textured walls of your homes.
It might even be a bit of a hassle, mostly if you do not wish to drive a hole into the walls.
Command strips are designed for smoother walls, so therefore using them on textured walls might be a no-no. Regardless there are a few tricks to try out in using command strips on textured walls.
Ride along and I will show you those tricks.
What Are Command Strips?
Back in the day, the use of nails for wall decorations was heavily used. This was so, especially for hanging frames and beautiful arts.
The problem with nails was they seem to be damaging the walls.
And there were side effects when you decided to change the location of the frames.
You either leave nails exposed or remove them leaving a hole in the wall. And this would damage the wall with a nail in the new location.
Therefore the need for a more suitable solution that would be less damaging was needed.
One of those such solutions and by far one of the most popular is command strips.
Command strips are a lot like decorative stickers except they are designed with strong adhesive on both sides of the strip.
They are used for holding objects on the walls. Objects such as picture frames.
And if combined with a hook can be used to hold coats and hats.
Tip: Remove command strips with caution as removing with force could damage the wall, taking with it part of the wall paint.
What Type Of Walls Are Command Strips Designed For?
Command strips are used to hold decorative objects on our walls in place.
It could hold things like our picture arts and other not-so-heavy designs.
The lovely part is you don’t get to drill a hole into any walls and you can remove the strip without any damage caused to the wall.
All you have to do is, stick one end of the strip to the wall and the other to the object.
However, command strips aren’t suitable for all wall types. Certain wall types hold the adhesive more.
While others won’t and will only end up slipping off the wall, damaging your objects or furniture.
Mostly, command strips are most suitable for smooth walls. Below are some of the wall types that command strips are designed for.
Painted walls are a good choice for command strips. By being painted, it means smooth regular paint.
Like oil paints and latex paints. Overall the wall has to be smooth.
Varnished Wood Walls
Wood walls are also good options for command strips.
Varnished woods respond well to adhesive, which makes it a good option for the strips.
Metal walls are another great option. The strips stick just right on the surface and stay there for as long as possible.
Using a command strip on glass surfaces is a very good option. The smooth nature of glass surfaces is a good feature.
Allowing the adhesive to stick to the surfaces very easily and stay there for as long as you like.
Laminate walls are also a suitable surface that the strips are designed for.
The smooth and sticky nature of the laminate makes the adhesive stick just good enough to the wall.
Tiles are also suitable for the adhesive of the command strip. Tiles are mostly used in the bathrooms and kitchen.
Hence, you can use them for holding your towels and other items in the bathroom. And can be used to hold utensils in the kitchen.
Smooth Solid Surfaces
These surfaces mostly include plastic-based surfaces such as PVC, acrylic, and POP.
These surfaces hold the adhesive just fine and can easily be removed without any damage.
Tip: Ensure to clean all and any surface with rubbing alcohol before sticking the command strip. This removes dirt and dust that may hinder the strip from sticking.
Does Command Strips Work On Textured Walls?
Textured walls are a great option for our home interiors.
Aside from the different look they give to our homes, they are perfect for masking home defaults such as an uneven wall.
The roughness and bright colors of the paint make it a lovely pick for many seeking something different.
So can you use command strips on textured walls?
Well yes, you can, but it isn’t so much a good choice.
Unfortunately, the roughness of textured walls makes it a poor choice for the use of command strips.
However, depending on the level of texture, command strips can work on texture walls.
If the texture is not too rough and still has a level of evenness then command strips can work on it.
But it wouldn’t be so strong as compared to smoother walls.
Tip: Command strips won't hold on concrete walls but giving the brick wall a neat and smooth painting would do the trick.
How To Make Command Strips Work On Textured Walls
It should be noted that using a command strip on a textured wall isn’t so much of a great option.
It is best to use alternative options which will be listed in this next header.
However, making command strips work on textured walls depends entirely on how textured the wall is.
And it also depends on the weight of what you want to hang.
Here are a few ways how to make it hold.
Use More Strips
The trick is to ensure that you use a lot of strips at the back of the picture or frame and on the wall.
This will help the object to have a more firm hold on the wall.
Also, it is a good idea to know the weight of your object and use strips that are meant for higher weights.
For instance, use a 12lbs strip for an object less than 10lbs.
Use Hot Glue
Another option that is a better idea is to use a little dab of hot glue.
This will give the strip more adhesive strength to hold on to the wall. This is a more solid option.
It will hold the object very firm and for a longer time. The problem with this option arises when you want to detach the strip from the wall.
If not removed properly, it could damage the wall.
Tip: Command strips don't hold well on non-stick surfaces such as fabric and wallpapers.
What Alternative Can Be Used Instead Of Command Strips
Using command strips isn’t such a great choice for textured walls.
However, there are alternatives that you can explore to get a firm hold of your frames and other objects.
Quite a number of these options can carry even more weight than a command strip.
They are more stylish and won’t damage your walls like a nail.
Below is a list of some of the alternatives:
- Adhesive Hooks
- Wall Anchors
- Drywall Hooks
- Hardwall Hangers
- Double-Sided Tape
- Adhesive Putty
- Magnetic Dots
Tip: When purchasing command strips, ensure to check for the size and the weight they can hold. They have a variety of sizes with the highest sizeable to hold 8lbs per one strip.
So does command strips work on textured walls? It all depends on how textured your wall is.
However, it isn’t a great idea to use them on textured walls.
The adhesive will wear out easily because of dirt with air.
This will weaken the adhesive and will lead to your object falling onto the ground.
There are numerous other options to opt for. That won’t damage your walls and will hold your objects firmly, even the heavy ones.